LD

Material

SCH.80 Pipe
Schedule 80 Pipe
Schedule 80 Pipe Schedule 80 Pipe
Schedule 80 Pipe
Schedule 80 Pipe

LD-500

SCH.80 Pipe

  • Excellent flow characteristics.
  • Smooth interior walls result in lower pressure loss and higher volume than conventional metal pipes.
  • Full range sizes supplied.
  • Non-corrosive and resistant to most chemicals.

PVC Material

  • Standard: SCH.80 – ASTM D1784
    • Designed for pressure systems requiring high strength and corrosion resistance.
    • Max service temperature: 140°F (60°C).

    CPVC Material

  • Standard: SCH.80 – ASTM D1784
    • Rigid CPVC designed for high-temperature resistance.
    • Max service temperature:
      • Continuous: 32°F to 194°F (0°C to 90°C).
      • Short term: up to 212°F (100°C).

    Please contact us for Flow Rate, CV Value, Working Pressure/Temperature, Pressure Loss, and other technical information.

    View More Details
    Specification

    Size: 1/2" up to 16"

    The Pipe is Manufactured to the Following Standard Specifications

    Type Material Dimensions Cell Classification
    PVC SCH.80 ASTM D1784 ASTM D1785 TYPE I, GRADE 1, PVC 12454
    CPVC SCH.80 ASTM D1784 ASTM F441 TYPE IV, GRADE 1, CPVC 23447

    Schedule 80 PVC ASTM D1785 and CPVC ASTM F441 Pipe Dimensions, Weights and Maximum Operation Pressure

    Nominal Pipe Size Outside Diameter Wall Thickness Approx. Inside Diameter Nominal Weight Max. Operating Pressure
    PVC CPVC
    inch inch inch lb/ft lb/ft psi
    1/2" 0.840 ± 0.004 0.147 ± 0.020 0.53 0.21 0.23 850
    3/4" 1.050 ± 0.004 0.154 ± 0.020 0.72 0.28 0.31 690
    1" 1.315 ± 0.005 0.179 ± 0.021 0.94 0.41 0.45 630
    1-1/4" 1.660 ± 0.005 0.191 ± 0.023 1.26 0.57 0.62 520
    1-1/2" 1.900 ± 0.006 0.200 ± 0.024 1.48 0.69 0.76 470
    2" 2.375 ± 0.006 0.218 ± 0.026 1.91 0.96 1.05 400
    2-1/2" 2.875 ± 0.007 0.276 ± 0.033 2.29 1.46 1.60 420
    3" 3.500 ± 0.008 0.300 ± 0.036 2.86 1.96 2.14 370
    4" 4.500 ± 0.009 0.337 ± 0.040 3.79 2.86 3.12 320
    5" 5.563 ± 0.010 0.375 ± 0.045 4.77 3.97 4.34 290
    6" 6.625 ± 0.011 0.432 ± 0.052 5.71 5.46 5.96 280
    8" 8.625 ± 0.015 0.500 ± 0.060 7.57 8.30 9.06 250
    10" 10.75 ± 0.015 0.593 ±0.071 9.49 12.30 13.43 230
    12" 12.75 ± 0.015 0.687 ± 0.082 11.29 16.93 18.48 230
    14" 14.00 ± 0.015 0.750 ± 0.090 12.41 20.30 22.16 220
    16" 16.00 ± 0.019 0.843 ± 0.101 14.21 26.10 28.49 220
    NOTE: Maximum Operating Pressure is applied to 73°F/23°C

    Properties of PVC & CPVC Pipe
    inch-lb Unit
    ITEM inch-lb unit Test Method
    PVC CPVC unit
    general
    Cell Classification 12454 23447 - ASTM D1784
    Maximum Usable Temp. 140 200 °F -
    Specific Gravity @ 73°F(23°C) 1.42 ± 0.02 1.55 ± 0.02 g / cc ASTM D792
    Water Absorption % increase 24 hrs @ 73°F(23°C) 0.04 0.04 % ASTM D570
    Hardness, Rockwell 110 - 120 115 - 125 - ASTM D785
    Poisson's Ratio @ 73°F(23°C) 0.38 0.36 - ASTM D638
    mechanical
    Tensile Strength @ 73°F(23°C) 7,100 7,700 psi ASTM D638
    Tensile Strength @ 194°F(90°C) - 3,200 psi ASTM D638
    Tensile Modulus of Elasticity @ 73°F(23°C) 410,000 380,000 psi ASTM D638
    Tensile Modulus of Elasticity @ 194°F(90°C) - 220,000 psi ASTM D638
    Flexural Strength @ 73°F(23°C) 14,000 13,000 psi ASTM D790
    Flexural Modulus of Elasticity @ 73°F(23°C) 400,000 390,000 psi ASTM D790
    Compressive Strength @ 73°F(23°C) ℇ=10% 10,000 14,000 psi ASTM D695
    Compressive Modulus of Elasticity @ 73°F 110,000 145,000 psi ASTM D695
    Izod Impact, notched @ 73°F(23°C) 1.5 3.0 ft-lb / in ASTM D256
    thermal
    Coefficient of Linear Expansion 2.5 - 3.5 x 10-5 3.0 - 4.0 x 10-5 in / in / °F ASTM D696
    Coefficient of Thermal Conductivity 1.20 0.90 BUT / in / hr / ft.2 / °F ASTM C177
    Heat Deflection Temperature Under Load (264psi, annealed) 165 230 °F ASTM D648
    Specific Heat 0.27 0.26 Cal. / °C / g ASTM D2766
    electrical
    Volume Resistivity >1.0 x 1015 >1.0 x 1015 ohm / cm ASTM D257
    Dielectric Strength >1000 >1000 volt / mm ASTM D149
    Dielectric Constant 3 3 - ASTM D150
    Power Factor 0.01 - 0.02 0.01 - 0.02 - ASTM D150
    Electrical Conductivity Non Conductor Non Conductor - -
    fire performance
    Flammability Rating _ 0 V-0, 5VB, 5VA - UL-94
    Flame Spread Index <10 <10 - UL-94
    Average Time of Burning <5 <5 sec ASTM D635
    Average Extent of Burning <10 <10 mm ASTM D635
    Burning Rate Self Extinguishing Self Extinguishing mm / min ASTM D635
    Limiting Oxygen Index (LOI) 45 60 LOI ASTM D2863

    Loading...
    Loading...
    Contact Us