catalogue

Home > catalogue > Multiconnector

Multiconnector

Description

Working Pressure	Materials
Male threaded Inlet port: 1-1/2” Male threaded Outlet port: 3/4” or 1” Female threaded Vent and Drain port: 1/2” 150PSI@73°F PN10BAR@22°C	Body: PP Plug: PP O-Ring: NBR
Standards
Thread: NPT, BSPT Color: BLACK

Features

Enhanced hexagonal rigid design with easy access 1/2” drain and vent pipe connection.
UV protected Polypropylene specially formulated for outdoor service.
Male threaded Inlet port: 1-1/2”
Male threaded Outlet port: 3/4” or 1”
Female threaded Vent and Drain port: 1/2”
Optional 3/4” or 1” ball valve -FT x FT or FT x FS
Pressure rating: 150psi/PN10bar@22°C.

Please contact us for Flow Rate, CV Value, Working Pressure/Temperature, Pressure Loss and other technical information.

Other 1

Installation Guide

After cleaning the 1½ " male thread of the multiconnector, apply PTFE tape on it in the clockwise direction. Tightly wrap the PTFE tape around the entire length of threads.
Screw 1½ " male thread of the multiconnector into the tank outlet connection in the clockwise direction until hand-tight with additional 1 to 1-1/2 turn only. Over strength will cause the amage to the body thread.

Note: DON’T USE PLUMBING TOOLS. And make sure both threads are completely clean, free of sand, dust, etc.

Other 2

LD-317 MULTICONNECTOR WITH VALVE
Optional 3/4” or 1” ball valve -FT x FT or FT x FS

If you continue browsing, you agree to our Privacy and Cookie Policy. Close